Kia Sorento 2003 - REMOVAL

REMOVAL
INSTALLATION
1. Apply the specified grease to the clutch pedal and bushings.
Chassis grease : SAE J310a, NLGI No.1
2. Install the clutch pedal mounting bolt.
3. Apply the specified grease to the clevis pin and washer.
Wheel bearing grease : SAE J310, NLGI No.2
4.
Install the push rod to the clutch pedal.
5.
Adjust the clutch pedal clevis pin play.
INSPECTION
1.
Check the pedal shaft and bushing for wear.
2.
Check the clutch pedal for bending or torsion.
3.
Check the clutch spring for damage or deterioration.
4.
Check the pedal pad for damage or wear.