Driving your vehicle
1285
Navigation-based Smart Cruise Control (NSCC)
Navigation-based Smart Cruise
Control standby
If the operating conditions are satisfied,
the white ( ) indicator will appear.
Navigation-based Smart Cruise
Control operating
If temporary deceleration is required in
the standby state and Navigation-based
Smart Cruise Control is operating, the
green ( ) symbol will appear on the
cluster.
If the Set Speed Auto Change function
operates, the green ( )symbol and
green set speed will appear on the clus
-
ter, and an audible alarm will sound.
僅 'Drive carefully' warning message will
appear in the following circum
-
stances:
僅 Navigation-based Smart Cruise Con
-
trol is not able to slow down your
vehicle to a safe speed.
Highway Auto Curve Slowdown and Set
Speed Auto Change function uses the
same ( ) symbol.
Highway Auto Curve Slowdown
僅 Depending on the curve ahead on the
highway (or motorway), the vehicle
will decelerate, and after passing the
curve, the vehicle will accelerate to
Smart Cruise Control set speed.
僅 Vehicle deceleration time may differ
depending on the vehicle speed and
the degree of the curve on the road.
The higher the driving speed, the
faster the vehicle will decelerate.
To Next Page
Loading...
