21
3
3
Safety features of your vehicle Seat belts
When using the rear centre seat belt the
buckle with the “centre” mark must be
used.
Always have the metal tab(A) inserted
into the buckle (A’).
If you are not able to pull out the safe-ty
belt from the retractor, firmly pull the
belt out and release it. After release, you
will be able to pull the belt out smoothly.
To release the seat belt:
The seat belt is released by pressing the
release button (1) in the locking buckle.
When it is released, the belt should auto
-
matically draw back into the retractor.
If this does not happen, check the belt to
be sure it is not twisted, then try again.
The seat belt should be locked into the
buckle on each seat cushion to be prop
-
erly fastened.
① : Rear right seat belt fastening buckle
② : Rear centre seat belt fastening
buckle
③ : Rear left seat belt fastening buckle
To Next Page
