Maintenance
67
Maintenance services
Touching metal parts
Do not touch metal parts (including strut
bars) whilst the engine is operating or
hot. Doing so could result in serious per
-
sonal injury. Turn the engine off and
wait until the metal parts cool down to
perform maintenance work on the vehi
-
cle.
僅 Do not put heavy objects or apply
excessive force on top of the engine
cover (if equipped) or fuel related
parts.
僅 When you inspect the fuel system
(fuel lines and fuel injection devices),
contact a professional workshop.
Kia recommends to visit an authorised
Kia dealer/service partner.
僅 Do not drive long time with the engine
cover (if equipped) removed.
僅 When checking the engine room, do
not go near fire. Fuel, washer fluid,
etc. are flammable oils that may cause
fire.
僅 Before touching the battery, ignition
cables and electrical wiring, you
should disconnect the battery "-" ter
-
minal. You may get an electric shock
from the electric current.
僅 When you remove the interior trim
cover with a flat bed (-) driver, be
careful not to damage the cover.
僅 Be careful when you replace and
clean bulbs to avoid burns or electri
-
cal shock.
To Next Page
Loading...
