31
3
3
Safety features of your vehicle Child restraint system (CRS)
ing positions. Their locations are shown
in the illustration.
Do not attempt to install a Child
Restraint System using ISOFIX anchor
-
ages in the rear centre seating position.
There are no ISOFIX anchorages pro
-
vided for this seat. Using the outboard
seat anchorages, for the CRS installation
on the rear centre seating position, can
damage the anchorages.
Type A
Type B
ISOFIX anchorages are located between
the seatback and the seat cushion of the
rear seat left and right outboard seating
positions, indicated by the symbols.
To use the ISOFIX anchorages, push the
upper portion of the ISOFIX anchorage
cover.
* (1) : ISOFIX Anchor Position Indicator
(Type A- , Type B- )
(2) : ISOFIX Anchor
Securing a Child Restraint System
with the “ISOFIX Anchorage Sys
-
tem”
To install an i-Size or ISOFIX-compatible
Child Restraint System in either of the
rear outboard seating positions:
1. Move the seat belt buckle away from
the ISOFIX anchorages.
2. Move any other objects away from
the anchorages that could prevent a
secure connection between the Child
Restraint System and the ISOFIX
anchorages.
3. Place the Child Restraint System on
the vehicle seat, then attach the seat
to the ISOFIX anchorages according
to the instructions provided by the
Child Restraint System manufacturer.
4. Follow the instructions of the Child
Restraint System's manufacturer for
proper installation and connection of
the ISOFIX attachments on the Child
Restraint System to the ISOFIX
anchorages.
Take the following precautions when
using the ISOFIX system:
僅 Read and follow all installation
instructions provided with your Child
Restraint System.
僅 To prevent the child from reaching
and taking hold of unretracted seat
belts, buckle all unused rear seat belts
and retract the seat belt webbing
To Next Page
