What to do in an emergency
247
If you have a flat tyre (with Tyre Mobility Kit)
Before using the Tyre Mobility Kit, follow
the instructions on the sealant bottle.
Remove the label with the speed restric
-
tion from the sealant bottle and apply it
to the steering wheel.
Please note the expiry date on the seal
-
ant bottle.
Using the Tyre Mobility Kit
1. Detach the speed restriction label (1)
from the sealant bottle (2), and place
it in a highly visible place inside the
vehicle such as on the steering wheel
to remind the driver not to drive too
fast.
2. Filling the sealant Strictly follow the
specified sequence, otherwise the
sealant may escape under high pres
-
sure.
3. Shake the sealant bottle.
4. Connect the filling hose (3) onto the
connector of the sealant bottle (2).
5. Ensure that button (9) on the com
-
pressor is not pressed.
6. Unscrew the valve cap from the valve
of the defective wheel and screw fill
-
ing hose (3) of the sealant bottle onto
the valve.
7. Insert the sealant bottle into the hous
-
ing of the compressor so that the bot
-
tle is upright.
8. Ensure that the compressor is
switched off, position 0.
To Next Page
Loading...
