Kicker Impulse IX252 - Specifications

Model
IX2302
IX1302
IX702
1X402
IX252
IX2302
IX1302
1X702
1X402
1X252
*0.2%
RMS Power (watts/channel)
@ 12.5V, 4Q stereo, 0.085% THD,
all channels driven
250 xX 2
150 x2
70 x 2
40 x2
25* X2
Dynamic Power (watts/channel)
@ 14.4V, 4Q stereo, 0.085% THD,
all channels driven
310 x2
175 x2
100 x 2
55x2
30* x2
Frequency Response
Input Sensitivity
Specifications
RMS Power (watts/channel)
@ 12.5V, 2Q stereo,0.2% THD,
all channels driven
360 x 2
200 x 2
105 x2
60 x2
30 x2
Dynamic Power (watts/channel)
@ 14.4V, 2Q stereo, 0.2% THD,
all channels driven
450 x2
260 x 2
140 x2
80 x 2
40 x2
20Hz-20kHz +0.5dB
“High level 1V-10V
Low level 150mV-3.0V
Signal-to-Noise Ratio
Active Electronic Crossover
KICKEQ™ Bass Boost
KICKEQ™ Treble Boost
>95dB, a-weighted, re: rated power
18dB/octave, selectable @ 70Hz or 110 Hz; selectable high pass, low pass, all pass
Variable to +18dB, centered @ 40Hz
Variable to +12dB, centered @ 18kHz
RMS Power (watts)
@ 12.5V, 4Q bridged mono,
0.2% THD
720 18.9
400 13.8
210 9.8
120 7.8
60 6.3
Dimensions (inches)
2.5Hx9.5Wx__L
Dynamic Power (watts)
@ 14.4V, 4Q bridged mono,
0.2% THD
900 482
520 350
280 248
160 198
80 160
Dimensions (mm)
63HX241Wx__L