Kicker CXA300.4 User Manual

CX MULTI-CHANNEL AMPS
CXA300.4
Owner’s Manual | English
Manual del Propietario | Español
AMPLIFICADOR DEL LA SERIE CX.4
Benutzerhandbuch | Deutsch
VERSTÄRKER DER CX.4-SERIE
Manuel d’utilisation | Française
AMPLIFICATEUR DE SÉRIE CX.4
CX
Amplifiers
2016 CX 4-Channel Amps Rev E.indd 12016 CX 4-Channel Amps Rev E.indd 1 9/29/2015 3:15:57 PM9/29/2015 3:15:57 PM

Kicker CXA300.4 Specifications

General

Brand	Kicker
Model	CXA300.4
Category	Amplifier
Language	English

Summary

Performance

Installation

Mounting

Choose a structurally sound location to mount your KICKER amplifier. Ensure adequate ventilation and secure it with screws.

Wiring

Disconnect the vehicle's battery before connecting the amplifier. Ensure a short, secure ground wire connection to the chassis.

Vertical Mounting

Power Wiring

Operation

Automatic Turn-On Selection

Explains the two automatic turn-on modes: Remote Turn-On and DC Offset Turn-On.

Troubleshooting

Green LED Off, No Output

Steps to diagnose no output when the power LED is off, checking voltage and connections.

Green LED On, No Output

Steps to diagnose no output when the power LED is on, checking RCA connections and speaker outputs.

Red LED Flashing

Troubleshooting red LED flashing, typically indicating low battery voltage or charging system issues.

Red LED On, No Output

Diagnosing issues when the red LED is on, covering thermal protection, voltage protection, and short circuits.

No or Low Output

Checking balance control, input/output connections, and source unit for no or low audio output.

Alternator Noise

Resolving alternator whine noise by checking RCA cables, routing, grounding, and gain settings.

Electronics Limited Warranty

Warranty Service Procedure

Instructions on how to obtain warranty service, including returning defective merchandise and RMA requirements.

Warranty Exclusions

List of conditions and damages that are not covered by the KICKER warranty.

International Warranty