To Next PageTo Next Page
Need help?Do you have a question about the Kicker CX.1 Series and is the answer not in the manual?
Provides instructions for using the Kicker CX series mono amplifiers in English.
Lists RMS power ratings and physical dimensions for each CX.1 model.
Details frequency response, signal-to-noise, input sensitivity, crossover, and bass boost.
Notes the availability of a separate remote bass control accessory.
Guides on selecting a location and securely mounting the amplifier.
Explains how to mount the amplifier vertically using specific brackets.
Details power, ground, and audio signal wiring connections for the amplifier.
Specifies minimum impedance and shows power/ground wiring for mono setup.
Explains fuse placement and the use of distribution blocks for multiple amps.
Explains the two automatic turn-on modes: Remote and DC Offset.
Guides on setting input sensitivity and gain for optimal performance.
Details the adjustable lo-pass crossover and bass boost features.
Guides on installing the optional CXARC remote bass level control.
Instructions for mounting and connecting the CXARC remote control.
Troubleshooting steps for when there is no audio output.
Diagnosing problems indicated by flickering or solid red protection LEDs.
Resolving issues with reduced output volume or alternator whine.
Steps to remedy audio signal noise caused by ground loops.
Details power output and signal-to-noise ratios per CEA-2006B standard.
Information on the three-year warranty with qualifying KICKER Installation Kits.
Details the two-year warranty for new products and three-month for refurbished.
Explains how to get warranty service and return defective merchandise.
Lists conditions and damages not covered by the Kicker warranty.
Information on contacting international dealers for warranty procedures.
Overview of warranty policies in Spanish, German, and French.
General
