To Next PageTo Next Page
Need help?Do you have a question about the Kicker CX300.1 and is the answer not in the manual?
General| Amplifier Class | D |
|---|---|
| Number of Channels | 1 |
| Rated Power @ 14.4V, 1 Ohm Mono | 300W |
| Frequency Response | 20Hz - 200Hz |
| Signal to Noise Ratio | > 95 dB |
| Input Sensitivity | 200 mV - 4V |
| Crossover Type | Low-Pass |
| Crossover Frequency | 50Hz - 200Hz |
| Fuse Rating | 30A |
| Power Output (RMS) @ 2 Ohms | 300W |
| Rated Power @ 14.4V, 2 Ohms Mono | 300W |
| Rated Power @ 14.4V, 4 Ohms Mono | 150W |
| Bass Boost | 0 - 12 dB |
Details technical specifications for KICKER CX amplifier models and common features.
Guidance on physically securing the amplifier and options for vertical mounting.
Instructions for connecting power, ground, and signal cables to the amplifier.
Details wiring diagram and fuse specifications for mono operation.
Explains the +12V and DC Offset automatic turn-on methods.
Covers setting input sensitivity and adjusting the variable lo-pass crossover frequency.
Details how to set input gain and adjust the variable bass boost feature.
Information on connecting and using the optional remote bass level control.
Guides users through resolving common problems based on LED indicators and symptoms.
Addresses ground noise issues and provides general safety cautions for vehicle installation.
Details the offer for a one-year warranty extension with qualifying installation kits.
Outlines the process for obtaining warranty service and returning defective merchandise.
Lists conditions and situations not covered by the KICKER product warranty.
Provides information on the expected turnaround time for warranty claims.
Directs users to contact local dealers for warranty policies specific to their country.
