To Next PageTo Next Page
Need help?Do you have a question about the Kicker CX600.5 and is the answer not in the manual?
General| Channels | 5 |
|---|---|
| Frequency Response | 10 Hz - 20 kHz |
| Signal to Noise Ratio | > 95 dB |
| Bridged Power (4 ohms) | 150 watts x 2 |
| Crossover | 50Hz - 200Hz |
| Bass Boost | 0-18dB |
| Dimensions | 2 in x 8-1/8 in x 12-9/16 in |
| Bridged RMS Power @ 4 Ohms | 150W x 2 + 600W x 1 |
Details RMS power, frequency response, signal-to-noise ratio, input sensitivity, and crossover settings.
Guidance on selecting a secure location and properly mounting the amplifier.
Instructions for space-saving vertical mounting using double-slotted brackets.
Detailed instructions for connecting power, ground, and audio signal cables.
Specifications for external fuses, power/ground wires, and KICKER wiring kits.
Configuration for using four channels with a subwoofer, specifying impedance.
Instructions for installing the optional CXRC remote bass level control.
Explanation of Remote Turn-On and DC Offset Turn-On modes.
How to set input level (Hi/Low) and use the fader switch.
Adjusting input gain, bass boost, and crossover frequencies for optimal sound.
Details on connecting and using the CXRC remote bass level control.
Diagnosing issues based on LED indicators (Green/Red) and checking power/ground.
Resolving no output, low output, and signal interference problems.
Addressing alternator whine, reduced bass response, and ground noise.
Details on the 2-year warranty for authorized purchases and extension with kits.
Steps for returning defective merchandise for repair or replacement.
Exclusions from warranty coverage, including improper installation and misuse.
Information on contacting local dealers for country-specific warranty procedures.
Cautionary advice regarding high sound levels and potential hearing damage.
