To Next PageTo Next Page
Need help?Do you have a question about the Kicker CX600.1 and is the answer not in the manual?
General| Bass boost | 0 - 12 dB |
|---|---|
| Amplifier class | - |
| Input sensitivity | 250 mV |
| Low pass filter range | 50 - 200 Hz |
| High pass filter range | 25 - 200 Hz |
| Signal-to-Noise Ratio (SNR) | 95 dB |
| Number of amplifier channels | - channels |
| RMS power output per channel (2 Ohm) | 600 W |
| RMS power output per channel (4 Ohm) | 300 W |
| Product color | Black |
Weight and Dimensions| Depth | 82.1 mm |
|---|---|
| Width | 161.8 mm |
| Height | 86 mm |
Detailed performance metrics for CX300.1, CX600.1, and CX1200.1 models.
Technical specifications that apply to all CX amplifier models, including dimensions and frequency response.
Guidance on selecting a location and securely mounting the KICKER CX amplifier.
Details on external fuse requirements and power/ground wire gauge for mono operation.
Explanation of automatic turn-on, input level selection, and gain adjustment.
Guide to adjusting crossover frequency and bass boost levels for optimal sound.
Information on using the optional CXRC remote bass level controller.
Diagnosing and resolving common 'no output' problems and interpreting LED indicators.
Troubleshooting audio noise, whining sounds, and other operational issues.
Procedure for warranty service, items not covered, and contact information.
Warranty policies and contact details for international customers in Spanish, German, and French.
