To Next PageTo Next Page
Need help?Do you have a question about the Kicker CXA300.1 and is the answer not in the manual?
General| RMS Power at 4 Ohms | 150 Watts |
|---|---|
| RMS Power at 2 Ohms | 300 Watts |
| Frequency Response | 20 Hz - 200 Hz |
| Signal-to-Noise Ratio | > 95 dB |
| Fuse Rating | 25A |
| Crossover | 50Hz - 200Hz, 12dB/octave |
| Subsonic Filter | 24dB/octave |
| Bass Boost | 0-12dB |
Detailed comparison of RMS power, dimensions, frequency response, and signal-to-noise ratio across CX models.
Instructions for selecting a mounting location and securing the amplifier securely.
Guidance on connecting high-level and low-level audio signals to the amplifier inputs.
Visual guides for connecting components and essential fusing recommendations.
Diagram illustrating correct power, ground, and woofer connections for mono operation.
Recommendations for fusing when using distribution blocks with multiple amplifiers.
Details on using +12V and DC Offset for automatic amplifier turn-on.
How to set input sensitivity and adjust the variable low-pass crossover frequency.
Instructions for setting input gain and using the bass boost control for optimal output.
Steps for surface-mounting and connecting the optional remote bass control.
Diagnosing and resolving common issues related to power, protection LEDs, and audio output.
Identifying and fixing audio noise or whining sounds related to engine RPM.
Tips for preventing ground noise and ensuring proper system grounding.
Technical specifications including power output and signal-to-noise ratios compliant with CEA-2006.
Information on the extended warranty program for CXA-Series amplifiers with qualifying kits.
Procedure for obtaining warranty service, including RMA, packaging, and return address.
Details on what is not covered by the KICKER limited warranty, such as improper installation.
Guidance for international customers regarding warranty policies and procedures.
