To Next PageTo Next Page
Need help?Do you have a question about the Kicker CXA1200.1 and is the answer not in the manual?
General| Amplifier Class | D |
|---|---|
| Number of Channels | 1 |
| Frequency Response | 20Hz - 200Hz |
| Signal-to-Noise Ratio | >95dB |
| Remote Bass Control | Yes |
| Dimensions | 12.2" x 9.5" x 2.5" |
| THD | <1% |
| Bass Boost Frequency | 40Hz |
| Rated Power (14.4V, 1% THD) | 1200W |
| Crossover | 24dB/octave variable low-pass 50-200 Hz |
| Subsonic Filter | 24dB/octave |
| Bass Boost | 0 - 12dB |
| Fuse Rating | 120A |
Lists available languages for the owner's manual.
Details on choosing a location and securing the amplifier.
Instructions for space-saving vertical mounting of the amplifier.
Guidance on connecting power, ground, and signal wires to the amplifier.
Diagram illustrating mono operation wiring, including fuses and grounding.
Explains the two automatic turn-on modes (+12V and DC Offset).
Details on setting input sensitivity and the variable crossover frequency.
Guidance on adjusting input gain and bass boost for optimal sound.
Information on installing and using the optional remote bass control.
Diagnosing issues based on Power (PWR) and Protection (PRT) LED status.
Understanding red LED indicators for thermal, voltage, and short-circuit protection.
Addressing no/low output and alternator noise issues.
How to prevent or fix ground loop noise in the audio signal.
Crucial safety advice for jump starting a vehicle to avoid damage.
Steps for obtaining warranty service or returning defective merchandise.
List of conditions and damages not covered by the KICKER warranty.
