To Next PageTo Next Page
Need help?Do you have a question about the Kicker CX1200.1 and is the answer not in the manual?
General| Bass boost | 0 - 12 dB |
|---|---|
| Amplifier class | - |
| Input sensitivity | 250 mV |
| Low pass filter range | 50 - 200 Hz |
| High pass filter range | 25 - 200 Hz |
| Signal-to-Noise Ratio (SNR) | 95 dB |
| Number of amplifier channels | 1 channels |
| RMS power output per channel (2 Ohm) | 1200 W |
| RMS power output per channel (4 Ohm) | 600 W |
| Product color | Black |
Weight and Dimensions| Depth | 163.1 mm |
|---|---|
| Width | 161.8 mm |
| Height | 86 mm |
Lists RMS Power, Length, Height, Width, Frequency Response, Signal-to-noise Ratio, and Input Sensitivity for CX series amplifiers.
Details Electronic Crossover, Bass Boost, Subsonic Filter, and Remote Bass features of the amplifiers.
Instructions for choosing a mounting location, ensuring ventilation, and drilling holes for amplifier installation.
Explains how to perform space-saving vertical mounting using hex keys and adjustable brackets.
Details connecting power, ground, and signal (RCA or high-level) inputs, emphasizing cable routing.
Specifies external fuse ratings and KICKER wiring kit part numbers for CX300.1, CX600.1, and CX1200.1 models.
Illustrates the wiring for mono operation, including connections for power, ground, remote, and speaker.
Explains the two automatic turn-on modes: Remote Turn-On and DC Offset Turn-On.
Guides on setting input level (Hi/Lo) and adjusting input gain to match the source unit output.
Details how to adjust the variable lo-pass crossover and bass boost controls for optimal sound.
Instructions for connecting and using the optional CXRC remote bass level control.
Provides visual guide and instructions for surface-mounting the CXRC remote and connecting its cable.
Addresses troubleshooting steps for 'Green LED off, no output' and 'Green LED on, no output' scenarios.
Explains the meaning of Red LED flickering (low battery) and solid Red LED (thermal/voltage/short circuit protection).
Troubleshooting tips for 'No or low output' and 'Alternator noise-whining sound' issues.
Offers advice on preventing ground noise by grounding RCA outputs to the chassis.
Details the offer for a one-year extended warranty with qualifying KICKER Installation Kit purchases.
Explains how to obtain warranty service, including returning defective merchandise with an RMA number.
Outlines what is covered by the warranty and lists common exclusions like improper installation or misuse.
Advises contacting local dealers for specific warranty procedures and policies applicable in different countries.
