Need help?Do you have a question about the Kicker KX100.2 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| RMS Power at 4 Ohms | 50W x 2 |
| Frequency Response | 20Hz-20kHz |
| Crossover Slope | 12dB/octave |
| Crossover Frequency | 50Hz |
| Bass Boost | 0-12dB |
Record purchase information and keep the original sales receipt for warranty validation.
Class A/B stable into 2 ohm stereo or 4 ohm mono loads.
Protects amplifier from accidents and undesirable operation (short circuit, over-voltage, thermal).
Variable bass boost circuit providing up to 12dB boost at 40Hz.
12dB selectable High pass or Low pass fixed at 80Hz, user defeatable.
Amplifier operates into bridged mono and stereo loads simultaneously.
Custom, removable covers to protect and hide wiring connections.
Standard warranty period when purchased from an Authorized KICKER dealer.
Guides on selecting a location, considering structural soundness, ventilation, and temperature.
Explains low and high level signal inputs, twisted pair interconnects, and power connection safety.
Shows common configurations for stereo, bridged mono, and simultaneous stereo/mono operation.
Explains the two rotary controls and one switch on the end panel for setting amplifier operation.
Details how to set the input gain control to match the head unit output for optimal performance.
Describes the fixed 12dB slope at 80Hz crossover for high pass or low pass filtering.
Explains the variable bass boost feature up to +12dB at 40Hz and its interaction with gain control.
Steps to troubleshoot when the green LED is off and there is no audio output.
Steps to troubleshoot when the green LED is on but there is no audio output.
Troubleshooting steps when the red LED is illuminated, indicating protection circuitry is engaged.
Guidance for diagnosing and resolving issues with a single channel having no output.
Steps to diagnose and eliminate engine-related whining noises from the audio system.
Troubleshooting steps for issues affecting stereo imaging and bass output quality.
Details RMS power output ratings under various impedance and voltage conditions.
Lists physical dimensions, frequency response, input sensitivity, and other technical parameters.
Instructions on returning defective merchandise for warranty repair or replacement.
Outlines conditions and situations that are excluded from the warranty coverage.
Provides an estimated timeframe for warranty service and repairs.
To Next Page
