To Next PageTo Next Page
Need help?Do you have a question about the Kicker KX800.1 and is the answer not in the manual?
Instructions for securely attaching the amplifier to a suitable location, ensuring adequate ventilation.
Explains the three automatic turn-on modes: +12V, DC Offset, and Audio.
Details how to connect high or low-level signals to the amplifier's RCA inputs.
Guides users on matching the source unit's output to the amplifier's input level.
Describes the variable filter to protect speakers from over-excursion at low frequencies.
Explains the variable LO-PASS crossover frequency adjustment from 40-160Hz.
Details the variable bass boost control for increased output, 0-18dB, at selected frequencies.
Covers the installation and use of the optional remote bass level control.
Addresses low battery voltage issues indicated by the PRT LED flickering.
Troubleshoots thermal, voltage, or short circuit protection issues indicated by the PRT LED.
Guides on checking balance control, RCA, and speaker output connections for low output.
Helps diagnose noise issues related to the alternator and engine RPM.
Explains how to prevent noise from head units by ensuring proper grounding.
Provides instructions for returning defective merchandise for warranty service and locating dealers.
General
