Kicker Impulse IX405D - Technical Specifications; 4-Channel Performance Specifications; Subwoofer Section Performance Specs

Specifications IX405D
4-Channel Section
RMS Power (watts/channel) 40 x 4
@ 12.5V, 4Ω stereo, 0.085% THD,
all channels driven
RMS Power (watts/channel) 55 x 4
@ 12.5V, 2Ω stereo,0.2% THD,
all channels driven
RMS Power (watts) 115 x 2
@ 12.5V, 4Ω bridged mono,
0.2% THD
Dynamic Power (watts/channel) 55 x 4
@ 14.4V, 4Ω stereo, 0.085% THD,
all channels driven
Dynamic Power (watts/channel) 75 x 4
@ 14.4V, 2Ω stereo, 0.2% THD,
Dynamic Power (watts) 150 x 3
@ 14.4V, 4Ω bridged mono,
0.2% THD
Frequency Response 20Hz-20kHz ±0.5dB
Input Sensitivity High level 1V-10V
Low level 150mV-3.0V
Signal-to-Noise Ratio >95dB, a-weighted, re: rated power
Active Electronic Crossover 18dB/octave, selectable @ 70Hz or 110 Hz;
KICKEQ™ Bass Boost Variable to +18dB, centered @ 40Hz
KICKEQ™ Treble Boost Variable to +12dB, centered @ 18kHz
Subwoofer Section
RMS Power (watts/channel) 290 watts
@ 12.5V, 2Ω mono,0.2% THD,
RMS Power (watts) 200 watts
@ 12.5V, 4Ω mono, 0.2% THD
Dynamic Power (watts/channel) 275 watts
@ 14.4V, 4Ω mono, 0.085% THD,
Dynamic Power (watts/channel) 390 watts
@ 14.4V, 2Ω mono, 0.2% THD,
Deminsions
2.5”H x 9.5”W x 18.9”L
63mmH x 241mmW x 482mmL
11