Need help?Do you have a question about the Kicker MX350.4 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Minimum Impedance Bridged | 4 Ohms |
| Minimum Impedance Unbridged | 2 Ohms |
| Frequency Response | 10Hz - 20kHz |
| Signal to Noise Ratio | >95dB |
| Crossover Slope | 12dB/octave |
| Input Voltage | 14.4V |
| Input Sensitivity | 250mV-10V |
| Low-Pass Crossover | 40Hz - 160Hz |
| Bass Boost | 0-12dB |
Instructions for connecting power, ground, and audio signal cables to the amplifier.
Details on setting internal crossovers for speakers and subwoofers.
Guidance on matching source unit output to amplifier input level.
Interpreting the amplifier's LED indicators for operational status and faults.
Steps to diagnose and resolve issues when there is no audio output.
Troubleshooting steps for common noise and grounding problems.
Detailed RMS power output specifications under various impedance loads.
To Next Page
