Kicker KX300.2 - Specifications Common to All Models

SPECIFICATIONS
Model KX300.2 KX400.2 KX500.2 KX800.2
RMS Power
In Watts, All Channels Driven
@ 13.8, 4Ω Stereo, 0.085% THD 75 x 2 100 x 2 125 x 2 200 x 2
@ 13.8V, 2Ω Stereo, 0.2% THD 150 x 2 200 x 2 250 x 2 400 x 2
@ 13.8V, 4Ω Mono, 0.4% THD 300 400 500 800
Dynamic Power
In Watts, All Channels Driven
@ 14.4V, 4Ω Stereo 110 x 2 150 x 2 205 x 2 295 x 2
@ 14.4V, 2Ω Stereo 175 x 2 217 x 2 285 x 2 420 x 2
@ 14.4V, 4Ω Mono 350 435 570 840
Length With Shroud 16” 19.25” 22.5” 25.75”
(40.64cm) (48.90cm) (57.15cm) (65.41cm)
Specifications common to all models
Height:
2.5 inches / 6.35 centimeters
Width:
10.125 inches / 25.7 centimeters
Length WWithout SShroud:
Subtract 5” (12.7cm) from chart above
Frequency RResponse:
20 Hz - 20 KHz, + 0 /- 1 dB
Input SSensitivity:
170 mV - 5 V low level, 340 mV - 10 V high level
Signal-tto-NNoise RRatio:
>95 dB, a-weighted, re: rated power
Electronic CCrossover:
Variable high or low pass, 50 - 200 Hz, 12 dB/octave
KickBass BBoost:
Variable 0 to +18 dB boost @ 40 Hz
10