Kicker S12L5 Specification

2
SPECIFICATIONS
Model Max amp Sensitivity Voice Xmax Mounting Outer Mounting
Power Coil Cutout Flange Depth
(watts) (dB 1w/1m) (in./
cm ) (in./ cm ) (in./ cm ) (in./ cm ) (in./ cm )
SS1155LL55
750 87.5 2.5 .61 13.75 x 13.75 15.6 x 15.6 7.84
6.35 1.55 34.92 x 34.92 39.6 x 39.6 19.91
SS1122LL55
600 86.9 2.0 .49 11.0 x 11.0 12.54 x 12.54 6.33
5.08 1.25 27.94 x 27.94 31.85 x 31.85 16.08
SS1100LL55
450 85.6 2.0 .49 9.25 x 9.25 10.66 x 10.66 5.69
5.08 1.25 23.49 x 23.49 27.08 x 27.08 14.45
SS88LL55
300 83.2 2.0 .38 7.25 x 7.25 8.8 x 8.8 4.86
5.08 .97 18.42 x 18.42 22.35 x 22.35 12.34
Based on measurements of Dual 2 Ohm models
Solo-Baric L5 woofers are available with dual 2 Ohm or dual 4 Ohm voice coils.
Both coils should always be hooked up.
The dual 2 Ohm woofer will give you a 1 Ohm or a 4 Ohm load depending on if
the coils are wired in parallel or in series. The dual 4 Ohm woofer will give a 2
Ohm or 8 Ohm load depending on how they are wired.
The terminals with solid red and black markings are for one voice coil. The ter-
minals with the white dots are for the second voice coil.
Parallel Wiring
Series Wiring
Dual 2 Ohm = 4 Ohm Load
Dual 2 Ohm = 4 Ohm Load
Dual 4 Ohm = 8 Ohm Load
Dual 4 Ohm = 8 Ohm Load
Dual 2 Ohm = 1 Ohm Load
Dual 2 Ohm = 1 Ohm Load
Dual 4 Ohm = 2 Ohm Load
Dual 4 Ohm = 2 Ohm Load
Wiring Options
Specifications

Kicker S12L5 Specifications

General

Brand	Kicker
Model	S12L5
Category	Subwoofer
Language	English