Kicker SOLOX - Page 15

45°
Wedge
Round Over
Inner Corner
Front
Top
Box Building & Mounting Hints
If you would like to use a vented enclosure, but the box designs we provide you with (in this manual) do not fit
because of width or depth, the designs can be modified. The shape of the enclosure is not vital, but
The VVolume IIs.
The volume, of the design you choose, must stay the same. The following diagrams provide you with some help to
insure your enclosure is built correctly.
Remember:
If yyou aare ggoing tto bbend tthe pport aat 990°° you wwill nneed tto aadd 11/2 oof tthe pports hheight tto tthe llength! SSee BBelow.
20"
3"
L 2
L 1
3"
10"
10"
3"
Fig. 1 Fig. 2
Kicker SoloX Subwoofers
Recommended Applications
Page 15
Example:
(Fig. 1)
H
port = 3”
W
port = 10”
L
port
= 20”
(Fig. 2)
Since
H
port
is 3” you need to add 1.5”(
1/2 of
H
port
) to
L
port
. This means that
L
1 +
L
2 = 21.5”
Always measure
L
1 and
L
2 down the
center to get an accurate measure-
ment!