Kidde P3010L-CO-CA - Product Features and Specifications

1. Introduction / Limitation of Alarms
2. Recommended Locations
3. Locations To Avoid
4. Installation / Mounting Instructions
5. Operation And Testing
6. Visual And Audible Indications
7. Nuisance And Hush
8. Battery
9. Deactivation Of Alarm
10.General Carbon Monoxide (CO) Information
11.Cleaning Your Alarm
12.Good Safety Habits
13.Service And Warranty
1. Introduction
IMPORTANT: Read all instructions before installation and keep
this user guide near the alarm for future reference.
Do not try to repair the smoke alarm yourself. Refer to the
instructions in Warranty section for service.
Thisalarmdetectsproductsofcombustionusingphotoelectric
technologyandcarbonmonoxideusinganelectrochemicalcell.Many
timesthroughoutthisUser’sGuide,wewillrefertoCarbonMonoxide
as“CO.”
Thisalarmisacceptableforusenearkitchensorcookingareasbutcan
beusedinallotherresidentialapplicationswhereasmokeorCOalarm
isrequired.
Afterten(10)yearsofcumulativepowerup,thisunitwill“chirp”two
timesevery30seconds.Thisisan“operationalendoflife”feature
whichwillindicatethatitistimetoreplacethealarm.
Tohelpidentifythedatetoreplacetheunit,alabelhasbeenaffixedto
thesideofthealarm.Writethe“Replaceby”date(10yearsfrominitial
powerup)inpermanentmarkeronthelabelpriortoinstallingtheunit.
Product Features and Specifications:
• Temperature:OperatingRange:4.4°C(40°F)to37.8°C(100°F)
• Humidity:Operatingrange:10-85%non-condensing
• AudibleAlarm:85+dBat10’@3.4±0.5KHzpulsingalarm
• SmokeSensor:Photoelectric
• COSensor:Electrochemical