24
Exposure to high levels of carbon monoxide can be fatal or cause permanent damage and disabilities. When
flu-like symptoms with fever are experienced, ensure that the possibility of CO poisoning is not automatically
ruled out. Many cases of reported carbon monoxide poisoning indicate that while victims are aware they are
not well, they become so disoriented they are unable to save themselves by either exiting the building or
calling for assistance. Also, young children and household pets may be the first affected. Familiarization with
the effects of each level is important.
15. Cleaning Your Alarm
YOUR ALARM SHOULD BE CLEANED AT LEAST ONCE A YEAR
You can clean the interior of your alarm (sensing chamber) by using compressed air or a vacuum cleaner hose
and blowing or vacuuming through the openings around the perimeter of the alarm. The outside of the
alarm can be wiped with a damp cloth. Use only water to dampen the cloth, use of detergents or cleaners
could damage the alarm.
If the alarm is in Fault mode and the Red LED is blinking a fault code of 10 or 14 flashes (after a Test/Hush
button push), the alarm may be in need of cleaning. After cleaning, press the Test/Hush button. If the fault
does not clear, the alarm needs to be replaced.
• Never use detergent or other solvents to clean the unit.
• Avoid spraying air freshener, hair spray, or other aerosols near the alarm.
• Do not paint the unit. Paint will seal the vents and interfere with the sensor’s ability to detect smoke and
CO.
• Never attempt to disassemble the unit or clean inside. This action will void your warranty.
• The following substances can affect the CO sensor and may cause false readings and damage to the
sensor: Methane, propane, isobutane, iso-propanol, ethyl acetate, hydrogen sulfide, sulfide dioxides,
alcohol based products, paints, thinner, solvents, adhesives, hair spray, after shave, perfume, and some
cleaning agents.
To Next Page
Loading...
