EasyManuals Logo

Kidde Truesense Combo User Manual

Kidde Truesense Combo
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
3. Other Alarm Visual And Audible Indicators
Operational Mode Visual Indications Audible Indications Action/Note
Normal (standby) AC power: Green LED on
continuously.
DC power: Green LED blink
approx every 60 sec.
Test (button press when
no alarm
condition is present)
(Note: Test is very loud,
stand a few feet away.)
Red LED blinks in time with
alarm pattern.
Single beep.
3 long beeps, voice "Fire!", 3
long beeps, 4 quick beeps,
Voice "Warning, Carbon
Monoxide," 4 quick beeps.
Perform Test/Hush® button
press once a week to verify
proper alarm operation.
Smoke or CO Alarm Memory
(unit has experienced a
smoke or CO alarm event, or
has detected 100ppm CO or
greater.)
Red LED blink every 16 sec. After button push, voice
“Smoke
previously detected" or
"Carbon Monoxide previously
detected" .
NOTE: On DC power, alarm
memory is only retained
for 24 hrs.
Push test button to clear
Alarm Memory.
Smoke Alarm Hush® Mode
(SMART Hus
CONTROL)
Red LED blinks every 2 sec. After button push, voice “Hush
Mode Activated." Smoke alarm
pattern stops. (If there is too
much smoke to allow Hush® :
voice "Too Much Smoke, Can-
not be Hushed”, Smoke alarm
pattern continues.)
This feature is to be used
only when a known alarm
condition, such as smoke
from cooking, activates
the alarm.
CO alarm reset None After button push: CO alarm
pattern stops.
Unit is conrming if CO is
present or if it experienced a
nuisance situation. Re-alarm
means danger. Move to fresh
air and call 911.
Initiating Alarm
(multiple alarms in an inter-
connected system)
Red LED blinks in time with
alarm pattern indicating that
this is the unit initiating the
alarm in an interconnected,
multiple alarm, system.
NOTE: It is possible for more
than one unit to detect
a hazard and become an
initiating alarm unit (Red
LED blinking).
Unit in either Smoke or CO
alarm mode.
If you require further information please contact Product Support at 1-800-880-6788 or write us at:
Kidde, 1016 Corporate Park Drive, Mebane, NC 27302. Our internet address is www.kidde.com.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kidde Truesense Combo and is the answer not in the manual?

Kidde Truesense Combo Specifications

General IconGeneral
BrandKidde
ModelTruesense Combo
CategorySecurity System
LanguageEnglish

Related product manuals