Kidde VM-1 Technical Reference Manual

Chapter 2: Product description
10 P/N 3101890-EN • REV 006 • ISS 21JUN18
Model
Description
VM
-NOCF Fiber Optic Network Option Module: Provides a fiber optic or combination fiber optic and
RS-485 communication path for VM-1 control panels. Installs on the VM-CPU and on a
half-footprint space on the CAB6B backbox. See installation sheet, P/N 3101783-EN for
specifications.
VM
-ETH1
Ethernet Adapter Card: Provides a standard 10/100BaseT Ethernet network connection
for panel programming and diagnostics. The card also provides transmission of system
events to a computer running FireWorks. Installs on the VM-CPU. See installation sheet
P/N 3101794-EN for specifications.
VM-ETH2
Ethernet Adapter Card: Provides a standard 10/100BaseT Ethernet network connection
for panel programming and diagnostics. The card also provides transmission of system
events to a computer running FireWorks
and central monitoring station (CMS). Installs on
the VM-CPU. See installation sheet P/N 3101794-EN for specifications.
VM-ETH3
Ethernet Adapter Card: Provides a standard 10/100BaseT Ethernet network connection
for panel programming and diagnostics. The card also provides transmission of system
events to a computer running FireWorks, CMS, and SMTP email server. Installs on the
VM-CPU. See installation sheet P/N 3101794-EN for specifications.
VM
-DACT Dual line dialer card. Provides dialer communications between the VM-1 control panel
and remote locations over telephone lines. Installs on the VM-
ELEC hardware layer. See
installation sheet P/N 3101786-EN for specifications.
VM
-PMI Paging Microphone Interface. Adds controls for emergency voice/alarm communications
to a VM-1 control panel. Cons
ists of an audio mounting bracket, EAEC Emergency Audio
Evacuation Controller card, audio enclosure, and paging microphone. Installs on the
CAB6B backbox. See installation sheet P/N 3101788-EN for specifications.
VM
-MFK Master Firefighter Telephone Kit. Adds two-way firefighter telephone capability to a VM-
PMI Paging Microphone Interface to comprise the fire command center. Consists of a
firefighter telephone, hook-switch card, and telephone controller card. Installs on the VM-
PMI. See installation sheet P/N 3101790-EN for specifications.
ACHS
Audio Channel Selector Card. Converts digital audio from an EAEC card into an analog
preamp signal. The control panel supports up to three ACHS cards. Installs on the VM-
PMI audio mounting bracket. See installation sheet P/N 3101791-EN for specifications.
D12LS-VM
Control-i
ndicating module. Provides an additional operator interface using an annunciator
strip with 12 groups of two LED-switches. Installs on the VM-ELEC operator layer. See
installation sheet P/N 3101793-EN for specifications.

Kidde VM-1 Specifications

General

Brand	Kidde
Model	VM-1
Category	Fire Alarms
Language	English