Need help?Do you have a question about the Kidde VS4 and is the answer not in the manual?
General| Power Source | 120V AC |
|---|---|
| Battery Backup | 9V battery |
| Hush Feature | Yes |
| Alarm Sound | 85dB at 10 feet |
| LED Indicator | Yes |
| Alarm Type | Smoke |
| Mounting Type | Wall or ceiling |
| Compliance | UL 217 |
Instructions for mounting the panel backbox, including surface and semiflush mounting.
Steps to install the control unit electronics into the panel backbox.
Details on connecting the panel to AC power supply and circuit specifications.
Instructions for connecting standby batteries to the control panel.
Information on wiring notification appliance circuits, including specifications.
Guidance on connecting addressable detectors and modules to the device loops.
Information on Level 1 and Level 2 password access for panel programming.
Procedure for automatically configuring the panel and connected devices.
Report listing detector maintenance status, dirty percentage, and sensitivity.
Reports detailing communication performance and quality of devices on a loop.
Utility to quickly check the system for ground faults.
Command to identify loop devices not communicating and generate a report.
Procedures for testing panel operation, including alarm and trouble modes.
To Next Page
