Kidde VS4 - Device Details Report; Internal Status Report

Chapter 4: Reports
P/N 3102351-EN • REV 005 • ISS 28DEC18 169
Loop/zone configuration report: Displays loop class, zone, device, mapping, and correlation
group configuration information.
Event configuration report: Displays loop event and panel event configuration information.
Dialer configuration report: Displays central monitoring station event notification settings for the
points in the system.
To view a System Configuration report:
1. Press the Menu button and choose Reports.
2. Choose System Configuration.
3. Choose:
All
Panel Operation
Panel Configuration
Loop/Zone Config
Devices
Event Config
Dialer Config
Internal Status report
The panel provides an Internal Status report that displays the current values for AC voltage,
battery voltage, and battery charge current. Internal Status reports can be printed or viewed on
the LCD.
To view an Internal System Status report:
1. Press the Menu button and choose Reports.
2. Choose Internal Status.
Device Details report
A Device Details report displays a device count that reports how many devices are connected
to the system. The report can also display the serial number for each device connected to the
system.
To view the device count on the system:
1. Press the Menu button and choose Reports.
2. Choose Device Details.
3. Choose Device Count.