Kidde VS4 User Manual

Appendix B: Worksheets
218 P/N 3102351-EN • REV 005 • ISS 28DEC18
Zone settings worksheet
The zone settings worksheet is used to document the configuration and settings for each of the
zones on the system.
Notes
• Print a copy of this worksheet for each zone in the system.
• For default settings, see “Factory default settings” on page 42.
Type ☐ Alarm ☐ Waterflow ☐ Monitor
☐ Supervisory (latching) ☐ Supervisory (nonlatching)
Label Line 1
Label Line 12
Correlation groups
Device allocation
First address (no less than the last address of the previous zone + 1)
Last address (first address + the number of devices – 1)
Event notification
Active
Print ☐ Yes ☐ No
NET (1-8) ☐ Yes ☐ No
Dialer ☐ Acct 1 ☐ Acct 1 & 2 ☐ Acct 2 ☐ None
Code (four-digit coded output)
CID
Trouble
Print ☐ Yes ☐ No
NET (1-8) ☐ Yes ☐ No
Dialer ☐ Acct 1 ☐ Acct 1 & 2 ☐ Acct 2 ☐ None
Code (four-digit coded output)
CID
Disable
Print ☐ Yes ☐ No
NET (1-8) ☐ Yes ☐ No
Dialer ☐ Acct 1 ☐ Acct 1 & 2 ☐ Acct 2 ☐ None

Kidde VS4 Specifications

General

Brand	Kidde
Model	VS4
Category	Fire Alarms
Language	English