User Instruction (Remote Control)
Using the remote control
The remove control should only be used by adult or under adult supervision.
ATTENTION:
The remote control will override all control input from the vehicle.
Insert / Changing Battery
1. Open the battery cover on the back of the remote control.
2. Insert 2 x AAA 1.5V batteries in the correct polarity.
3. Put the cover back to the remote control.
Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc),
or rechargeable batteries.
Pairing the remote control to the vehicle
1.
2. Then turn on the vehicle power.
3. The indicator light should stay on after successful pairing.
The battery should only be changed by an adult.
WARNING:
WARNING:
To Next Page
Loading...
