PMC-A 5
Safety Symbols
For the safe use and safe maintenance of this product, the following
symbols are used throughout this manual and on the product. Note the
meaning of each of the symbols to ensure safe use of the product. (Not
all symbols may be used.)
or
Indicates that a high voltage (over 1 000 V) is used here.
Touching the part causes a possibly fatal electric shock. If physi-
cal contact is required by your work, start work only after you
make sure that no voltage is output here.
DANGER
Indicates an imminently hazardous situation which, if ignored,
will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if ignored,
could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if ignored, may
result in damage to the product and other property.
Shows that the act indicated is prohibited.
Indicates a general danger, warning, or caution.
When this symbol is marked on the product, see the relevant
sections in this manual.
Indicates a caution for hot surface of the product.
When this symbol is marked on the product, see the relevant
sections in this manual.
Protective conductor terminal.
Chassis (frame) terminal.
On (supply)
Off (supply)
In position of a bi-stable push control
Out position of a bi-stable push control
To Next Page
Loading...
