Need help?Do you have a question about the Kikusui PMC 18-5A and is the answer not in the manual?
General| Brand | Kikusui |
|---|---|
| Model | PMC 18-5A |
| Category | Power Supply |
| Language | English |
Specifies the required input voltage and acceptable voltage range for product operation.
Details the type and rating of the input fuse for the product.
Information for qualified users and guidelines for intended product use to prevent injury.
Precautions regarding power input, fuse replacement, and internal hazards to prevent fire and shock.
Warnings about accessing internal parts and potential high surface temperatures to prevent burns.
Ensures proper grounding of the product for electrical safety and shock prevention.
Provides guidelines for safe installation, suitable environments, and product relocation.
Key considerations for operating the power supply and performing routine upkeep.
Information on seeking professional service for adjustments or repairs to maintain functionality.
Overview of the manual's content, including models covered and intended audience.
Details the scope of the manual, including covered models of the PMC-A series.
Introduces the PMC-A Series, highlighting its performance, features, and applications.
Lists the main functionalities and capabilities of the PMC-A series power supplies.
Describes optional accessories that can enhance the functionality of the PMC-A series.
Guidance on verifying all accessories are included and undamaged upon receipt.
Essential guidelines for selecting a safe and suitable environment for product installation.
Steps to ensure safe handling and transport of the power supply to prevent damage or injury.
Instructions for installing the PMC-A into a rack mount system.
Procedure for correctly connecting the power cord to the unit and outlet for safe operation.
Explains the importance and method for grounding the power supply for electrical safety.
Step-by-step instructions to safely power up the PMC-A unit.
Explanation of constant voltage (CV) and constant current (CC) operating modes.
Procedure for setting up and using the power supply in Constant Voltage mode.
Procedure for setting up and using the power supply in Constant Current mode.
Details on the built-in protection features like OVP and OHP.
How to connect and utilize the remote sensing feature for stable output.
Guide for connecting multiple units in parallel for increased current capacity.
Instructions for connecting units in series to increase output voltage.
Factors affecting load connection, including peak currents and regenerative loads.
Guidance on managing loads with peak or pulse-shaped current characteristics.
Methods for handling loads that generate reverse current to the power supply.
Precautions for connecting loads like batteries that store energy.
Guidelines for selecting appropriate load cables based on current capacity and voltage rating.
Procedure for securely connecting load cables to the power supply's output terminals.
Introduction to controlling the power supply remotely via external signals.
Detailed steps for connecting and configuring external control interfaces.
Methods for controlling the output state using external contacts.
How to monitor output voltage, current, and status externally.
Step-by-step guide for safely replacing the internal fuse.
Instructions for calibrating voltage and current systems for accuracy.
Detailed steps for calibrating voltage-related indicators and settings.
Detailed steps for calibrating current-related indicators and settings.
Technical specifications for the PMC-A series Type I models.
Technical specifications for the PMC-A series Type II models.
Illustrations showing the physical dimensions of Type I and Type II models.
To Next Page