6 PMC-A
Safety Precautions
The following safety precautions must be observed to avoid fire hazards,
electric shock, accidents, and other failures. Keep them in mind and make
sure to observe them.
Using the product in a manner that is not specified in this manual may
impair the protection functions provided by the product.
Users
• This product must be used only by qualified personnel who
understand the contents of this operation manual.
•If unqualified personnel is to use the product, be sure the
product is handled under the supervision of qualified
personnel (those who have electrical knowledge). This is to
prevent the possibility of personal injury.
Purpose of use
• Never use the product for purposes other than the product's
intended use.
• This product is not designed or manufactured for general
home or consumer use.
Input power
• Use the product within the rated input power voltage range.
• For applying power, use the power cord provided. For
details, see the respective page in the operation manual.
• This product is designed as an equipment of IEC
Overvoltage Category II (energy-consuming equipment
supplied from the fixed installation).
Fuse
•The fuse can be replaced with a new one. When replacing a
fuse, use the one which has appropriate shape, ratings, and
specifications. For details, refer to the specification section in
this manual.
Cover
• Some parts inside the product may cau se physical hazards.
Do not remove the external cover.
• When the product is under the operation, the surface of top
cover may get high temperature. It may cause burn on the
skin.
O
p
e
ra
t
i
o
n
Manual
To Next Page
Loading...
