74 PMC-A
Specifications
This chapter gives description on the electrical and mechanical speci-
fications of the PMC-A.
Unless otherwise specified, the specifications are based on the following
conditions.
• The load is a pure resistance.
• The negative output is connected to the chassis terminal using the short
bar provided.
• After a warm-up time of 30 minutes has elapsed with the load current
flowing at 23
°C ± 5 °C and 80 % rh or less.
• TYP values, standard values, and calculated values do not guarantee the
performance. Use these values as a guideline when using the power sup
-
ply.
7
To Next Page
Loading...
