Kikusui PWR801L User Manual

User’s Manual
PART NO. IB031113
Aug. 2017
400W model
PWR401L PWR401ML
PWR401MH PWR401H
800W model
PWR801L PWR801ML
PWR801MH PWR801H
1200W model
PWR1201L PWR1201ML
PWR1201MH PWR1201H
Regulated DC Power Supply
PWR-01 Series
Component Names 8
Installation and Preparation 13
Connecting the Power Cord 14
Load Considerations 18
Selecting the Load Cables 20
Output Terminal Insulation 22
Connecting to the Output Terminals 24
Turning the Power On 28
Remote Sensing function 30
Basic Features 33
Measured Value Display and Setting Display
34
Panel Operations 36
Output Operation 37
Operation Overview 41
CV Power Supply and CC Power Supply 43
Using the PWR-01 as a CV or CC Power
Supply
45
Protection functions and Alarms 46
CONFIG Settings 54
Preset Memory function 70
Locking Panel Controls (Key Lock) 71
CONFIG Shortcut function 72
Switching from Remote Mode to Local Mode
73
Advanced Features 75
Bleeder Circuit function 76
Variable Internal Resistance function 78
Sequence function 79
Synchronized Operation 80
External Control 83
Product Operation 84
About the J1/ J2 Connectors 85
Notes for Connecting External Voltage (Vext)
88
Output voltage control 90
Output Current Control 92
Controlling the Output On and Off States 94
Controlling Output Shutdown 96
Controlling the Clearing of Alarms 97
External Monitoring 98
Parallel/ Series Operation 101
Master-Slave Parallel Operation 102
Series operation 108
Maintenance 113
Calibration 114
Cleaning 116
Specifications 117
400W model 119
800W model 122
1200W model 125
Common specifications 128
Appendix135

Kikusui PWR801L Specifications

General

Brand	Kikusui
Model	PWR801L
Category	Power Supply
Language	English

Summary

Installation and Preparation

Connecting the Power Cord

Instructions for safely connecting the power cord to the unit.

Load Considerations and Cable Selection

Basic Features

Output Control and Operation Modes

Protection Functions and Alarm Management

Overview of protection functions and how alarms are handled and cleared.

Setting Protection Parameters (OVP/OCP)

Detailed steps for setting overvoltage and overcurrent protection trip points.

External Control

Controlling Output via External Signals

Controlling voltage and current using external voltage, resistance, or contacts.

Output State and Alarm Control via Contacts

Parallel/ Series Operation

Master-Slave Parallel Operation

Setting up and operating multiple units in master-slave parallel configuration.

Series Operation

Connecting and operating units in series for higher output voltage.

Appendix

Troubleshooting Guide

Common issues and their solutions for operation and control problems.