D350/D260 4K DECODER· USER MANUAL
Copyright © KILOVIEW Electronics CO., LTD. All rights reserved
5 Installation and connection
5.1 Connect power and video signal
Connect the power adaptor (DC12V/1A) to the device, the device starts working once powered on.
Connect the SDI or HDMI cable to the corresponding port of the device (It can be connected at the same
time and output two videos simultaneously), and the other end is connected to display devices such as
monitor, digital signage, screens and etc.
Note: Please use the standard power adaptor equipped because other unqualified power
supplies may damage the device.
To Next Page
Loading...
Need help?
General
