10
2.4 FITTING OF THE MOUNTING FRAME
a) The mounting frame supplied with the product is secured by the four off
fixing screws in the mounting flange as shown below in Fig. 7, and the
fire is secured to the opening by the 4 off mounting holes as shown :-
Fig. 7
b) The bottom section of the mounting frame can be removed from the
main body of the mounting frame by removal of the four screws as
indicated. This may be required for servicing etc. See fig. 8 below
Fig. 8
NOTE
: THE MOUNTING FRAME SHOULD BE FITTED EVEN IF USING
MARBLE BACKING SLIPS
4 off
mounting
frame fixing
screws
Four screws that allow removal of
the bottom section of the mounting
frame
4 off Holes used to
secure fire to
opening
To Next Page
Loading...