Page 4
TOOLS AND MATERIALS REQUIRED
• drill and drill bit set
• tape measure
• 7/16” open end wrench (coax connections)
• adhesive sealant (compatible with roof material)
• appropriate fasteners to install all components and wiring
• 5/32” allen wrench, channel lock or pliers (to remove shipping bolts)
• wire cutter (to remove shipping tie strap)
• Optional: Dealers may use 1844 KING Keypad for confi guration process
Section 3 INSTALLATION
1844 Keypad
KIT CONTENTS
1. Unpack and identify all components (Fig. 5).
FIG. 5
To Next Page
Loading...
