King gates Star GDO 100 User Manual

King Gates S.r.l.
Via A. Malignani, 42 - 33077 Sacile (PN) ITALY
Tel. +39 0434 737082 - Fax +39 0434 785351
e-mail: info@king-gates.com web: www.king-gates.com
ISTRUZIONI ROLLS - R01
MADE IN ITALY
Rolls
MANUALE ISTRUZIONI (pagina 05)
INSTRUCTION MANUAL (page 17)
MANUEL D'INSTRUCTIONS (page 29)
ANLEITUNGS HEFT (seite 41)
MANUAL DE INSTRUCCIONES (página 53)
I
GB
F
D
E
ISTBJV01

King gates Star GDO 100 Specifications

General

Maximum Thrust	1000 N
Power Supply	230 V AC
Voltage	230 V
Frequency	50 Hz
Control	Radio remote control
Safety Features	Obstacle detection

Summary

INSTALLATION

ASSEMBLING THE BELT UNIT

Assemble the belt unit using transfer pulley and motor support.

ASSEMBLING THE GUIDE

Assemble GRB guides with belt, profiles, and fastenings.

FIXING THE GEAR MOTOR TO THE GUIDE

Mate motor casing to support and fix using screws.

WALL MOUNTING THE GUIDE

Fix guide above door centrally, or onto ceiling, using dimensions.

FIXING THE DOOR TO THE BRACKET

Fix bracket to door, ensuring surfaces mate perfectly.

ADJUSTING THE END OF STROKE

Adjust end of stroke by loosening and tightening catch screw on carriage.

MANUAL MANOEUVRE

ELECTRICAL CONNECTIONS

CONNECTION DIAGRAM

PROGRAMMING THE RADIO REMOTE CONTROLS

PROGRAMMING THE CHANNEL FOR ACTIVATING THE AUTOMATION

PROGRAMMING THE CHANNEL FOR ACTIVATING THE COURTESY LIGHT

DELETING ALL THE CODES

PROGRAM THE TRAVEL LIMITS

SIMPLIFIED LEARNING PROCEDURE

INITIAL SETTINGS OF DIP-SWITCHES

PROFESSIONAL LEARNING PROCEDURE

OPERATION MODES

TIMED AUTOMATIC CLOSING MODE

STEP BY STEP MODE WITHOUT AUTOMATIC CLOSING

STEP BY STEP MODE WITH AUTOMATIC CLOSING

TRIMMER

Trimmer "FOR" - Motor speed

Trimmer "PAU" - Pause time

Trimmer "OBS" - Obstacle sensitivity

OPERATION OF THE SAFETY DEVICES

PHOTOCELL (PHO input)

SAFETY IN OPENING (SFT/PED input)

SAFETIES SELF-TEST

SLOW-DOWN

SIGNALLING LED