King gates ROLLS User Manual

ROLLS
IT Istruzioni ed avvertenze per l’installazione e l’uso
EN Instructions and warnings for installation and use
FR Instructions et consignes pour l’installation et l’utilisation
DE Anleitung und Warnhinweise für die Installation und Nutzung
ES Instrucciones y advertencias para la instalación y uso
PT Instruções para instalação e programação
Made in Italy

King gates ROLLS Specifications

General

Brand	King gates
Model	ROLLS
Category	Garage Door Opener
Language	English

Summary

General Warnings and Safety

Safety Warnings

Crucial safety instructions for personal protection and correct installation procedures to prevent injury.

Installation Warnings

Precautions and warnings related to the installation process, ensuring safe setup and operation.

Product Description and Specifications

Installation Procedures

Preliminary Checks

Essential pre-installation checks to ensure the gate and environment are suitable for automation.

Fitting the Gearmotor and Guides

Steps for fitting the gearmotor and associated components to the door system.

Assembly of Guide GRB23

Assembly of Guide GRB3

Fitting the Gearmotor to the Guide

Mounting the Gearmotor to the Ceiling

Electrical Connections

Instructions for making the necessary electrical connections to the control unit and accessories.

Description of Electrical Connections

Connecting ROLLS to the Mains

Procedure for safely connecting the ROLLS unit to the main electrical power supply.

Control Unit Settings

Dip-Switch Adjustment

Guide to configuring the control unit's functions using dip-switches.

Potentiometer Adjustment

Instructions for adjusting motor power, obstacle sensitivity, and pause time via potentiometers.

Transmitter (Remote Control) Programming

Start Button Programming

Procedure to program a remote control button for the automation's start function.

Programming AUX Output Button

Programming Courtesy Light Button

Deleting All Memorized Transmitters

Deleting a Single Transmitter

Remote (Tools-Free) Transmitter Programming

Programming the Door Path

Basic Programming of Automation Movement

Basic self-learning procedure to memorize door opening and closing times and slowdown points.

Advanced Programming of Automation Movement

Advanced method to set door movement times and manually configure slowdown start points.

Testing and Commissioning

Reset Procedure

Devices Connectable to the Control Unit

Safety Devices Connection

Connection guidelines for safety devices like photocells and safety edges to terminals S2 Photo and S1 Edge.

Wired Commands Connection

Advanced Programming Features

Backjump Adjustment

AUX Output Programming

Selection of AUX Output and Operating Mode

Selection of Devices for S1 Edge

Technical Specifications