To Next Page
J
Jennifer SolisAug 15, 2025
Why does my King Industrial Saw overload kick out frequently?
- KKelly WattsAug 15, 2025
The overload on your King Industrial Saw might be kicking out frequently due to several reasons: 1. The extension cord may be too light or too long; replace it with an adequate size cord. 2. You might be feeding stock too fast; try feeding it more slowly. 3. The blade could be in poor condition (dull, warped, or gummed); clean or replace the blade. 4. The blade might be binding because of a misaligned rip fence; check and adjust the rip fence. 5. Warped wood can cause the blade to bind; select another piece of wood. 6. There could be low house current; contact your electrical company.
General
