8. General Setting
When the display power on, press both and buttons for 2
seconds to enter the setting menu. When the display is on status
of general setting, press the button for 2 seconds to quit
setting menu.
8.1 Wheel Diameter Setting
Press button or to select the correct value to match the
wheel diameter. Selectable values include: 16 inch、18inch、20
inch、22 inch、24 inch、26 inch、700C，28 inch。Default diameter
is 26 inch.
Press button to confirm the value of wheel diameter and
enter next setting at the same time.
Wheel Diameter setting
8.2 Speed-limit Setting
When the running real-time speed is faster than the value of
limited- speed you set, the controller will cut off the motor power
To Next Page
Loading...
Need help?
General
