Need help?Do you have a question about the King Technology SPARCO CYCLER and is the answer not in the manual?
Guides users on adjusting the control dial based on pool size and pump run time for optimal chlorine levels.
Provides step-by-step instructions for replacing the o-rings on the control dial for proper function.
Details the process of replacing the o-ring on the Sparco Cycler cap to ensure a tight seal.
Explains how to replace the control knob on the back of the Sparco Cycler unit.
Advises on maintaining correct back pressure (3-8 psi) and flow rates (20-80 gpm) for optimal operation.
Outlines special installation requirements for high-flow situations like high GPMS or in-floor cleaners.
General| For Use With | Swimming Pools |
|---|---|
| Type | Sand |
| Filter Area | 0.45 m² |
| Filter Tank Diameter | 16 in |
| Operating Pressure | 50 psi |
To Next Page
