- Switch, Sensitivity adjustment, volume adjustment: Turn up the sensing sensitivity and
alarm volume clockwise, and turn it down counterclockwise.
- Charging port: Type-C
- Press for 2 seconds, the white flash flashes twice, and switch the single/double-sided
induction mode.
- Press once to switch to Frequency working mode:
Mode 1: Automatic frequency switching of ultrasonic wave from 15kHz~65kHz.
Mode 2: Emit ultrasonic 15kHz~65kHztalarm sound, and the ultrasonic speakers continue to blare until
the animal is driven out of the sensing range.
Mode 3: Red and white LED flashing light, infrared light driving mode.
Mode 4: Emit ultrasonic alarm sound.
Mode 5: Red and white LED flashing light, infrared light, ultrasonic wave and ultrasonic alarm sound
driving mode.
Mode 6: Red and white LED flashing light, infrared light, ultrasonic and voice alarm
Working mode:
Standby mode: the standard working state after starting the power supply. In this mode, the equipment
can normally input signals and trigger the function output.
Sleep mode: Under certain conditions, the equipment enters sleep mode. In this mode, the equipment
turns off the functions of signal reception and function output, and only ensures the core operation of
the equipment, to greatly reduce the power consumption.
Induction mode: infrared rays sense thermal energy objects (adjustable straight line 1-12M) to emit
ultrasonic waves (automatic frequency conversion). High-power 360-degree flash ultrasonic alarm drives
animals.
Single-sided induction mode and double-sided induction mode: one machine can be used for two
purposes, covering a wider area (at present, the single-sided induction mode is used in the market).
To Next Page
Loading...