EasyManua.ls Logo

KINGDOM SK031 - Function Output and Specifications; Operational Outputs and Range; Technical Specifications; Product Parameters Summary

Default Icon
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Function output:
Strobe light, ultrasonic speaker (sweep frequency), high decibel speaker (various audio source).
1. Scan mode: ultrasonic 13.5KHZ-65.5KHZ (adjustable) automatically switch sensing mode from low
frequency to high frequency.
2. Flash mode: High-power LED burst flash and low-power LED light wave wavelength automatic change
mode.
Alarm sound: 10 kinds of alarm sounds are played randomly to reduce the adaptability of animals to
sound.
Effective range: 5,000 square feet (approximately 400 square meters).
Specifications
Infrared sensing angle: 240 degrees.
Sensing distance: 1-12m, depending on the size and temperature of the animal. (The larger the animal is,
the farther the distance is, the higher the temperature, and the closer the distance is.).
Power supply mode: The device is powered by 2200mAh 18650 lithium battery. Charging, (solar panel
open circuit voltage: 5.8V; solar panel operating current: 20-200mA) or an external 5V can be used
500mA adapter for charging, in case of a period of cloudy weather, you can use the adapter for charging,
charging will be lit with a red indicator, fully charged lights up in green.
Product parameters
Model:
SK031
Induction Angle(L&R):
240° Double Sided Induction
Induction Angle(U&D):
15°
Battery:
2200mAh 18650 lithium battery
Power Supply:
Solar or USB
Sensing distance:
1-12m
Waterproof Grade:
IP66
Ultrasonic Frequency:
13.5-65.5kHz