Kingfisher CLAG60ASBL User Manual (English)

Questions and Answers:

L
Laura BryanAug 11, 2025
Why is the suction performance reduced in my Kingfisher CLAG60ASBL?
- D
  Daniel JenkinsAug 11, 2025
  Reduced suction performance in your Kingfisher Ventilation Hood can occur due to several reasons. Ensure that the speed setting isn't too low by selecting a higher speed. Dirty aluminum filters can also cause this, so clean them according to the care and maintenance instructions. Check for any obstructions in the top vent and clear them. If you have an optional vent kit, make sure it's correctly fitted per the manufacturer's instructions. Verify that the vent hose maintains the correct diameter throughout, without reductions or restrictions, as per the installation guidelines.
J
jdavisAug 22, 2025
How to fix excessive vibration in a Kingfisher CLAG60ASBL?
- X
  xbrownAug 22, 2025
  Excessive vibration in your Kingfisher Ventilation Hood can stem from a few issues. First, take down the appliance and check that it is properly fixed on the brackets. Also, if the fan blade is damaged, switch off the appliance immediately and arrange for repair by qualified service personnel.
J
Jasmine SmithAug 31, 2025
Why do cooking smells linger even though my Kingfisher CLAG60ASBL works normally?
- K
  Kyle CaldwellAug 31, 2025
  If your Kingfisher Ventilation Hood is working normally but cooking smells linger, it might be because a carbon filter is not fitted in recirculation mode, or the fitted carbon filter is full of grease. Fit a carbon filter or replace the carbon filter, referring to the Care and maintenance section for instructions.