EasyManua.ls Logo

Kingfisher CLCG60LKSS - User Manual

Kingfisher CLCG60LKSS
114 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Artwork done by Impala Services Ltd
Info@impala-tach.com
SEPARATIONS JOB INFO
PROCESS
BLACK
KNG #: KNG-737-0003
Agency Job #: –
Product Description:
Kingsher Contact: Stephanie Rankin /
Jet Deng
EAN: 5059340446103
Vendor: Global Asia
No. of New Line Drawings: 0
Page Size: A5 / No. of Pages:
VERSION #
This le is the property of Kingsher Group Plc. No copying, alteration or amendment is permitted
without written authorisation from the Kingsher Brand Team.
1
27/04/22
Mohit
2
11/05/22
Mohit
4
08/06/22
Sonia
3
31/05/22
Mohit
5
XX/XX/21
XXX
DO NOT PRINT THIS PAGE -
IT IS FOR INFORMATION ONLY
5059340446103_MNL_IN_V04.indb 15059340446103_MNL_IN_V04.indb 1 8/6/2022 3:47 PM8/6/2022 3:47 PM

Questions and Answers

  • K
    Kyle WilsonAug 11, 2025
    Why is the suction performance reduced on my Kingfisher Ventilation Hood?
    • J
      Julia BoydAug 11, 2025
      Reduced suction performance in your Kingfisher Ventilation Hood can occur for several reasons. Ensure you've selected a higher speed setting. Check and clean the aluminum filters, following the instructions in the care and maintenance section. Make sure the top vent isn't blocked. If you're using an optional vent kit, verify it's correctly installed per the manufacturer's instructions. Finally, confirm that the installation complies with the manufacturer's guidelines, ensuring the vent hose has the correct diameter without reductions or restrictions.
  • C
    Christine RodriguezAug 27, 2025
    What to do if cooking smells linger when my Kingfisher CLCG60LKSS Ventilation Hood is working?
    • M
      Melissa WrightAug 27, 2025
      If your Kingfisher Ventilation Hood works normally but cooking smells linger, it might be because the carbon filter is not fitted in recirculation mode or is full of grease. You should fit or replace the carbon filter, referring to the Care and maintenance section for instructions.
  • B
    Bryan GarzaSep 3, 2025
    Why are both the light and motor not working on my Kingfisher Ventilation Hood?
    • A
      Allen FordSep 3, 2025
      If both the light and motor of your Kingfisher Ventilation Hood are not working, it could be due to a blown light bulb. In this case, you should ring the customer helpline at the end of the Care & maintenance section to arrange an engineer visit. Alternatively, the power connection might be loose, so check the power supply.
  • K
    Kathryn GomezSep 10, 2025
    How to fix excessive vibration in my Kingfisher Ventilation Hood?
    • R
      Robert YangSep 12, 2025
      Excessive vibration in your Kingfisher Ventilation Hood may be due to improper installation on the brackets. You should take down the appliance and check it is properly fixed. Another cause could be a damaged fan blade, in which case you should switch off the appliance and have it repaired by qualified service personnel only. Also, the fan motor might not be fixed tightly.

Kingfisher CLCG60LKSS Specifications

General IconGeneral
TypeChimney
MaterialStainless Steel
Width60 cm
Number of Motors1
Maximum Extraction Power650 m³/h
Number of Speed Settings3
Noise Level65 dB
LightingLED
Control TypePush Button
Filter TypeAluminum Grease Filter

Related product manuals