kingparrot b2t User Manual

*IMPORTANT– RETAIN FOR FUTURE REFERENCE*
PLEASE READ CAREFULLY
2 x Allen keys Cot Hardware and parts list
Kingparrot Products
1 x Drop side 1 x Fixed side
1 x Base
NOTE: Capping rails
must be positioned
on the correct piece
fixed side or drop
side to fit correctly.
Glide pin holes
for drop side panel
4 x Base
Supports
20 x
Wooden
dowels
4 x
Drop side
glide pins
24 x
20mm
Connecting
bolts
4 x
28mm
Connecting
bolts
10 x
54mm
Connecting
bolts
8 x
70mm
Connecting
bolts
B
C
2 x End panels
4 x cot
feet
2 x Base side supports
2 x Base extensions
AUSTRALIA
27-37 Vallance Street
St Marys NSW
2760 Australia
Ph: 02 9833 3769 Fax: 02 9673 4240
UNITED KINGDOM
Westfield, East Garston
Hungerford
RG17 7HD UK
Ph: 44 14 8864 9663 Fax: 44 14 8864 8869
1 x Drop side capping rail
Holes for fixed
side panel
NOTE: When standing end panels up to
assemble cot please make sure you
have correct side up. Holes for base
supports should be at the lower part of
both the end panels.
1 x Fixed side capping rail
NOTE:
the fixed side capping rail
is slightly longer than the drop side
capping rail.
4 x
40mm
Connecting
bolts
D E A
G I
B2T Baby To Teen Cot / Single Bed
V 09/06

kingparrot b2t Specifications

General

Brand	kingparrot
Model	b2t
Category	Indoor Furnishing
Language	English

Summary

Product Identification and Hardware

Cot Hardware and Parts List

Detailed list and visual identification of all cot hardware and parts.

Assembly Preparation Notes

Important initial notes on panel orientation for correct assembly.

Safety, Standards, and Maintenance

Safety Warnings and Standards Compliance

Key safety warnings, mattress requirements, and compliance standards for Australia/NZ and UK.

Cot Maintenance Guidelines

Instructions for regular checks, cleaning, and moving the cot safely.

Assembly Instructions

Assembling the Fixed Side

Step-by-step guide for assembling the fixed side panel.

Assembling the Drop Side

Step-by-step guide for assembling the drop side panel.

Assembling the Base

Instructions for assembling the cot base and extensions.

Attaching the Cot Feet

Procedure for attaching the cot feet to the end panels.

Attaching the Fixed Side Panel

Connecting the fixed side panel to the cot's end panels.

Placing Base Supports

Installing base supports for different mattress base heights.

Attaching the Drop Side Panel

Procedure for attaching the functional drop side panel.

Lowering Base into Cot

Placing the assembled cot base onto its supports.

Filling End Panel Holes

Securing the top end panel holes with bolts.

Lowering Base Height for Baby Position

Adjusting the mattress base height for different age positions.