kingparrot b2t - Assembly Instructions; Assembling the Fixed Side; Assembling the Drop Side; Assembling the Base

B2T Cot assembly instructions
Assembling the drop side
1
Place 6 x B wooden
dowels into top of
fixed side and place
capping rail on top.
2
Assembling the fixed side
NOTE: Capping rail for fixed side is slightly longer than capping rail for drop side.
Place 6 x B wooden
dowels into top of
drop side and place
capping rail on top.
Screw capping
rail to drop side
using 3 x G bolts.
3
Assembling the base NOTE: Base, Base side supports &
Base extensions must face up.
Screw capping
rail to drop side
using 3 x G bolts.
Place 8 x B wooden
dowels into sides of
base and push base
side supports onto
base.
Screw base side supports to
base using 4 x G bolts
Base side support
Base
Push base extensions onto
each end of the base.
Screw base extensions onto each
end of the base using 4 x I bolts.
Base extensions
A
B
C D
Note: Due to the weight of this product assembly of this cot requires 2 people.
V 09/06