KINGS YCD70K - Installation; Power Management; Power Requirements; Distance Cable Gauge for DC Input

3. INSTALLATION
It is important that your appliance is installed
and operated in accordance with the
manufacturers instructions to guarantee the
performance, efciency and operation.
• Position the appliance in a safe and secure
location. Limit exposure to heat sources or
direct sunlight which can affect the units’
performance and efciency.
• The normal operation of the appliance
requires heat to be radiated away from
the condenser located in the rear end of
the unit. Adequate airow is required to
be available around the compressor at all
times.
AC INPUT 240V at 50Hz
DC INPUT 12V or 24V DC
4.5M OR LESS 2.1mm
2
(AWG14)
4.6M AND OVER 3.3mm
2
(AWG12)
For optimum performance and efciency, it is important that the appliance has a reliable 15A fuse
protected DC supply in good condition. Direct connection to the battery is recommended and
reduces the risk of voltage drop to the appliance.
It is recommended that the correct sized automotive electrical cable is used for direct connection
and ensure the cable is protected by a 15A fuse; do not use resettable circuit breakers. It is
important that the correct cable size is used for the installation of the DC supply as over distance
the voltage can decrease if the incorrect sized cable is being used.
Use cable sets supplied with fridge. Third party cabling may void your warranty.
4. POWER MANAGEMENT
4.1 POWER REQUIREMENTS
The appliance is designed to operate on AC and DC voltage inputs.
4.2 DISTANCE CABLE GAUGE FOR DC INPUT
5